The AD114 has been designed
especially with miniaturisation in mind. The brief was to design a mixer
suitable for working with a new generation of laptop edit systems. The resulting
mixer not only meets this demand, but exceeds it in every respect. It is certain
to find applications in every field of live and recorded sound where size
matters!
-
A choice of MIC/LINE OR LINE
INPUTS.
Mic/line input have 48v Phantom Powering, Stepped Attenuator and High Pass
Filter.
Line inputs have Continuously Variable Input Level Control.
-
PHASE CHANGE
-
3 BAND EQ
-
PUSH BUTTON ROUTING between
left and right output
-
PRE-FADE LISTEN
-
CHANNEL OVERLOAD INDICATOR
-
2 TRANSFORMER BALANCED OUTPUTS
with XLR type connectors and rotary level control.
-
MONITORING of headphones on
Type ‘A’ jack with Level Control. Push button selection of Left, Right or
Stereo Output or Return with level control.
-
POWERING - From 8 x AA
internal batteries or a 10-15V external source.
-
METERING with PPM or VU scale
-
LINE-UP OSCILLATOR, 1k Tone
into output
-
LIMITER with Stereo Link
-
BATTERY TEST
-
SLATE Electret microphone with
level control for tape identification
-
METER ILLUMINATION
-
A 15 PIN ‘D’ CONNECTOR to
carry outputs and return for quick set-up
-
An ILLUMINATED MIXER ON/OFF
SWITCH which selects between internal or external power
| Max Gain |
Mic 80dB
Line 50dB |
| Max Input |
At Max Gain Mic -42dB
Line -7dB
Stereo-Return+18dB
Input Impedance Mic >1k5 OHMS
Line >6k5 OHMS
Stereo-Returns >100K OHMS |
| Mic Power |
48v Phantom |
| Frequency Response |
+0,-1dB; 20Hz-20kHz L-R
+0,-1.5dB; 20Hz-20KHz Monitor |
| High Pass Filter |
-3dB @ 90Hz & 150Hz 12dB/Octave |
| Equalizer |
HF+10dB @ 10kHz Variable Slope
MF1 +18dB @ 1k8Hz
MF2 +18dB @2k3Hz
MF1+2 +18dB @3k8Hz
LF+10dB @ 100Hz Variable Turnover |
| Total Harmonic Distortion
|
<0.05% @ 1 kHz @ 0dBm output
<0.15% @ 40Hz; -15kHz @ +15dBm output |
| Crosstalk |
<-70dB; 40Hz to 15 kHz
Interchannel & Intergroup |
| Max Output Level |
+23dBm (600R LOAD ) L-R Trans Bal
+ 18dBm (600 R LOAD) Headphone Monitor
Unbalanced |
| Output Impedance |
<60R L-R and Aux 1&2
<20R Monitor 1&2 |
| Overload Indicator |
illuminates @ 15dBu at the pre fader point |
| Noise |
<126dB EIN Mic 20HZ-20kHz 200R Source
<75dB SNR Line 20HZ-20kHz |
| Output Limiter Threshold
|
+8dB RATIO 7:1
Attack 4mS & 20mS Switchable
Release 40mS & 100mS Switchable |
| Equalization |
HF + 10dB @ 10kHz
LF + 10dB @ 100Hz
MF + 15dB @ 2k5Hz Q=1.2 |
| Powering |
External 12V-15V on 4 Pin XLR
Internal 8 'AA' cells NiCads or Drycells |
| Current Consumption |
180mA |
| Dimensions |
220mm x 230mm x 80mm |
| Weight |
2.25Kg |
){kind=link}