Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
BNC to three-pin lemo cable for connecting external time code sources to the A10-TX.
Cradle for the A10-RX or Sound Devices A20-RX receiver that allows it to be used directly as a slot receiver for 13-pin D-type Sony slots.
Chip which reduces unwanted RF signals by -40dB when soldered into a Cable Techniques low-profile side exit XLRF connector.
21.5" 3-pin XLRF to 3-pin Lemo heavy-duty cable with built-in filter to reduce unwanted RF signal by -40dB.
Attaches to an A10-RX or Sound Devices A20-RX Receiver to change the orientation when inserted into an SL-6 or A10-Rack
Chip which reduces unwanted RF signals by -40dB when soldered into a straight 3-pin XLRF connector.
Converts an A10-RX receiver into a two channel headphone monitor.
Four-slot, eight-channel, Dante-enabled wireless enclosure compatible with the A10-RX, Sound Devices A20-RX, and most unislot and SuperSlot receivers.
Antenna with SMA connector for A10-RX and A10-TX.
25 Pin D-Type Universal/Superslot end plate for the A10-RX or Sound Devices A20-Rx.
Replacement mounting plate for A10-RX and Sound Devices A20-RX with Universal/SuperSlot adapter.
Accessory plate for mounting the A10-TX on a boom poles with a 3/8" threaded top screw.