Cables & Adaptors

You've got signal over here in this equipment…but you need over there in that equipment! What's a person to do? Right, cables! (Yeah, OK, or wireless, smart alec, but that's several sections down)
Cyclone Right-Angle XLR Cable
Rycote

Cyclone Right-Angle XLR Cable

Extended name

10" XLRM3 to Right-Angle XLRF3

Short XLR cable for use with Cyclone windshields.

Price: 
Add to Wishlist 
Cyclone XLR Cable
Rycote

Cyclone XLR Cable

Extended name

10" XLRM3 to XLRF3

Short XLR cable for use with Cyclone windshields.

Price: 
Add to Wishlist 
XLR Holder
Rycote

XLR Holder

Fits between any 3/8" male and 3/8" female threaded mount and secures an XLR connector.

Price: 
Add to Wishlist 
XLR3F to Lightning Mic Cable
Saramonic

XLR3F to Lightning Mic Cable

19.5' (6m) three-pin female XLR to Lightning cable for connecting professional XLR microphones to an Apple iOS device.

Price: 
Add to Wishlist 
1/8 Locking TRS to USB-C Coiled Cable
Sennheiser

1/8" Locking TRS to USB-C Coiled Cable

1/8" (3.5mm) locking TRS to USB-C coiled cable.

Price: 
Add to Wishlist 
1/8 to Locking 1/8 Coiled Cable
Sennheiser

1/8" to Locking 1/8" Coiled Cable

1/8" (3.5mm) to locking 1/8" (3.5mm) coiled cable.

Price: 
Add to Wishlist 
1/8 to XLR3M Coiled Cable
Sennheiser

1/8" to XLR3M Coiled Cable

1/8" (3.5mm) to three-pin XLRM coiled cable.

Price: 
Add to Wishlist 
CAT 5e Ethercon Cable
Sennheiser

CAT 5e Ethercon Cable

Extended name

82' (25m)

Cat 5e Ethercon cable with protective shell designed for use with the Spectera Base Station.

Price: 
This item is in pre-order.
Expected release: Second Quarter 2025
Add to Wishlist 
CL100 Output Cable
Sennheiser

CL100 Output Cable

Extended name

XLRM to 3.55mm

XLR unbalanced line output cable for G3 receivers.

Price: 
Add to Wishlist 
Dual 1/8 Locking TRS to 1/8 Coiled Y-Cable
Sennheiser

Dual 1/8" Locking TRS to 1/8" Coiled Y-Cable

Two-channel split coiled cable designed for using two EK receivers with 1/8" (3.5 mm) TRS to dual locking 1/8" (3.5 mm) TRS.

Price: 
Add to Wishlist 
Headset Cable 7, Unterminated
Sennheiser

Headset Cable 7, Unterminated

6.5' headset connection cable with pigtail ends. For use with HMD headsets which require a separate cable.

Price: 
Add to Wishlist 
Lemo3 Locking Connector
Sennheiser

Lemo3 Locking Connector

Three-pin locking Lemo connector for Zaxcom and Sennehsier 2000, 3000, and 5000 series transmitters.

Price: 
Add to Wishlist 
1/8 TRS M to Dual 1/8 TRS M and 1/8 TRS F Y-Cable
Sescom

1/8" TRS M to Dual 1/8" TRS M and 1/8" TRS F Y-Cable

18" long 1/8" (3.5mm) TRS male to 1/8" (3.5mm) TRS male and 1/8" (3.5mm) TRS female line level y-cable for monitoring and recording from a single output jack.

Price: 
Add to Wishlist 
Ghost Inline Mic Preamp
Sescom

Ghost Inline Mic Preamp

Single channel inline XLR3 preamp for dynamic and ribbon microphones.

Price: 
Add to Wishlist 
IL-19 Inline Audio Hum Eliminator
Sescom

IL-19 Inline Audio Hum Eliminator

Extended name

XLRM to XLRF Barrel Adapter

Removes ground loop hum, mode noise & differentially induced hum in one device.

Price: 
Add to Wishlist 
Mobile Device XLR Mic Cable
Sescom

Mobile Device XLR Mic Cable

Extended name

TRRS to XLR3F & 3.5mm

One foot cable for recording from an XLR mic on a mobile device. 3.5mm monitoring tap included

Price: 
Add to Wishlist 
A120S
Shure

A120S

Extended name

In-Line On/Off Switch

No connectors. Requires soldering.

Price: 
Price: 
0.00
Add to Wishlist 
A15AS
Shure

A15AS

Extended name

Switchable Attenuator

Can be set to 15, 20, or 25 dB. Passes phantom power

Price: 
Price: 
0.00
Add to Wishlist 
A15BT
Shure

A15BT

Extended name

Bridging Transformer

Used to connect balanced and unbalanced devices having different signal levels or impedances.

Price: 
Price: 
0.00
Add to Wishlist 
A15HP
Shure

A15HP

Extended name

High Pass Filter

Helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand

Price: 
Price: 
0.00
Add to Wishlist 
A15LA
Shure

A15LA

Extended name

50 dB Attenuator / Line Adapter

Converts balanced line level signals to microphone level (50dB attenuation)

Price: 
Price: 
0.00
Add to Wishlist 
A15PRS
Shure

A15PRS

Extended name

Switchable Phase Reverser

Reverses the phase (polarity) of a balanced audio signal. In line switch permits selection of normal or reversed polarity for comparison purposes.

Price: 
Price: 
0.00
Add to Wishlist 
A15RF
Shure

A15RF

Extended name

In-Line RF Interference Attenuator

RF filter, XLR in/out. Passes phantom power

Price: 
Price: 
0.00
Add to Wishlist 
A15TG
Shure

A15TG

Extended name

Tone Generator

700 Hz microphone-level signal

Price: 
Price: 
0.00
Add to Wishlist 
MVX2U Digital Audio Interface
Shure

MVX2U Digital Audio Interface

Allows any XLR microphone to connect directly to a computer via USB.

Price: 
Add to Wishlist 
SX-LC8+ to Sound Devices 8-Series Cable
Sonosax

SX-LC8+ to Sound Devices 8-Series Cable

35" binder to USB cable for connecting the SX-LC8+ Linear Fader to Sound Devices 833, 888, and Scorpio recorders.

Price: 
Add to Wishlist 
BNC to USB-C Time Code Input Cable
Sound Devices

BNC to USB-C Time Code Input Cable

Designed for the A20-Mini.

Price: 
Add to Wishlist 
Lemo5 to USB-C Time Code Input Cable
Sound Devices

Lemo5 to USB-C Time Code Input Cable

Designed for the A20-Mini.

Price: 
Add to Wishlist 
MCX to SMA Cables
Sound Devices

MCX to SMA Cables

Set of two 22.7" right-angle MCX to right-angle SMA 50 ohms cable to connect antennas or RF distro systems to the SL-2.

Price: 
Add to Wishlist 
MixPre USB Y-Cable
Sound Devices

MixPre USB Y-Cable

Extended name

USB-C TO Dual USB-A

USB-C to 2x USB-A Y-cable for powering the MixPre-3 or MixPre-6 recorder from a computer.

Price: 
Add to Wishlist 

Pages