Contains five hook and loop straps for securing cables .
Ultra low-loss 50 Ohm coax cable with BNC male to BNC male connector.
Right angle cable for PSC RF 1 x 8 Splitter. Available for SMA to SMA or SMA to BNC
25 foot breakaway snake with dual XLR and 1/8th inch monitor feed.
25' Breakaway Snake for use with Sound Devices 664 Field Mixer. Available with TC In or TC Out.
Allows 12T microphones to operate with 48V phantom power.
Provides transformer isolation between equipment.
XLR4 cable for connecting PSC Bell & Light Station to the power supply or another station.
25' cable available in three versions: for 788T; for FP33 and 302; and for Sony HD cameras.
Breakaway cable with breakout box and quick release.
Attenuates line level signals by 50dB to provide mic level output.
Dual right angle BDS power cable for the PSC PowerStar Mini and Triple Play power distribution boxes.
4-pin Hirose output cable for PowerStar Mini and Triple Play power distribution boxes.
Right angle BDS power cable for the PSC PowerStar Mini and Triple Play power distribution boxes.
For use with Lectrosonics 185, 187, 190, 195, 201, 211, 411 receivers.
For Lectrosonics SR receiver and battery eliminator for Lectrosonics SMA transmitter. 24".
For Sound Devices 552, 788T, 744T, 722, 302, MixPre (V2), 442, MM1 (V2), Lectrosonics Quadpack, Wendt X5, PSC Promix 6, AlphaMix, M4mkII, Sen. 3041U, Sony WRR855, SQN-4S. 24"
Standard BDS power output cable w/ right angle plug (center pin positive). For use with Lectrosonics IFBT1, 100, 200, 400 series & BattElim, PSC DV Promix 3, Shure FP-32A & FP-33 mixer, and others.
4" BDS input cable.
6' adapter cable for US civilian fixed wing aircraft.
6' adapter cable for civilian helicopters and military aircraft. 20dB pad.
Low-loss coaxial cable.
Short XLR to Lemo cable for use with Schoeps CCM Lemo mics and Rycote Cyclone.
Short XLR to MZL cable for use with the Sennheiser MKH 8060 and Rycote Cyclone.
Short XLR cable for use with Cyclone windshields.
Short right-angle XLR cable with integrated low cut filter.
18" right-angle XLR cable with integrated high pass filter.
Fits any 3/8" threaded boom pole, mic stand, or shock mount.
XLR unbalanced line output cable for G3 receivers.
Removes ground loop hum, mode noise & differentially induced hum in one device.
One foot cable for recording from an XLR mic on a mobile device. 3.5mm monitoring tap included
No connectors. Requires soldering.
Can be set to 15, 20, or 25 dB. Passes phantom power
Used to connect balanced and unbalanced devices having different signal levels or impedances.
Helps to eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines, low-frequency rumble caused by wind noise or air conditioning system, and stage/floor noise transmitted to a microphone through the microphone stand
Converts balanced line level signals to microphone level (50dB attenuation)
[email protected] (212) 629-9430[email protected] (404) 855-2255