High sensitivity microphone with clip, windscreen, and 3.5mm locking connector for Sennheiser 100 series wireless. Available in black, beige, brown, and white.
High sensitivity lav hardwired with TA4F connector for Shure transmitters.
High sensitivity lav hardwired 3-pin Lemo for Lectrosonics SSM, Zaxcom, WisyCom, and Sennheiser 2000 and 3000/5000 (SK)
Extends the run of DPA lavaliers with Microdot connectors for more versatile mic placement.
Clip for the 4060, 4060 Slims, and 4071 series lavaliers.
Two-sided 24" x 36" sign with reflective and non-reflective sides. Fits into an 11" diameter pouch
Sticker-backed foam for padding shoes and other noisy contact points. Sold by the square foot.
With M1 connector, side push-to-talk and quick-disconnect audio tube
Foldable, durable, and waterproof USB keyboard with built-in touchpad.
50 ohm BNC to BNC cable.
20" cable for powering Lectrosonics receivers.
Canare Starquad, Neutrik Connectors
18" 3.5mm cable.
Snap-on battery eliminator with Hirose 4-pin connector for Sound Devices MixPre-3 and MixPre-6 recorders.
Viper clip for use with Countryman EMW lavalier microphones.
Lavalier protection in black, beige, cocoa, tan, or white and flat (+0dB), bright (+4dB), and very bright (+8dB) frequency responses.
Contains one black and one white single tie clip for the B6 lavalier microphone.
Converts Countryman B6 wired with a threaded connector to specified wireless transmitter. Select tx make/model from dropdown.
For use with Countryman B6 lavalier microphones. Available in black and white.
Wind protection for the B6 lavalier mic.
Replacement belt clip for Denecke power supplies.
Reads and displays SMPTE/EBU time code.
Compact full featured smart slate. Reads and displays SMPTE/EBU time code.
Simple plug-in DC voltage checker tests for the presence of phantom power, intercom, and more.
Extremely short and lightweight supercardioid condenser microphone with Rycote zeppelin, suspension, and windjammer.
High sensitivity lav hardwired TA5F for Lectrosonics.
Simultaneously charges two lithium ion batteries or acts as a power supply for the Cantar X3.
14V intelligent battery which generates performance data readable by Aaton's other products.
Protects Cantar X3 or Mini screens. Available in two versions: X3's with serial numbers 244 and below and newer X3/Minis.
Securely holds lavalier in-between shirt buttons. For Countryman B6 lavalier.
Securely holds lavalier in-between shirt buttons. For DPA 4060 lavalier.
Distributes antenna signal and power to up to six diversity receivers.
Single-wire walkie talkie headset that fits Motorola AX, CLS, CT, SP, DTR, RDX and XTN series radios.
Screw-on adaptor for threaded 1/8" jacks.
Collapsible table stand with a 5/8" thread mount.
Display module with accurate time code and many special features.
Highly accurate time code generator with built-in WiFi and recorder integration.
Compact sync box with Lemo5 and Lemo5 to BNC time code cables for Sony, Canon, Blackmagic, Arri, and Varicam cameras.
Compact sync box with Lemo5 to Lemo4 time code interface cable for Red DSMC, Epic, Weapon, Helix,and Monstr cameras.
Compact omnidirectional microphone designed to capture excellent underwater sound.
19.5" cable for connecting the ACN-Master Lockit ACN port with the C-Link In of the Sound Devices 788T for wireless control, time code, and metadata management.
For the Ambient QX and Jumbo QP 5190/6200 boom poles
3/8″ boom pole spacer for use with the Ambient Boom Cable Interlock.
Boom pole mount for XLR cable or plug-on transmitter.
15" right-angle XLRF to XLRM thin cable with boom pole mount for XLR cable or plug-on transmitter.
4'6" Modular Extension for QS & QP4140 Boompoles
Straight XLR cable kit for the QP 4140 boom pole. Available in mono or stereo.
[email protected] (212) 629-9430[email protected] (404) 855-2255