788T-SSD Recorder

<Internal Sampling Frequency>32, 44.1, 47.952, 48, 48.048, 88.2, 96, 96.096</Internal Sampling Frequency> <External Clocking Sampling Frequency>32–96.096 kHz via word clock or digital inputs</External Clocking Sampling Frequency> <Internal Data Path and Processing>32 bit, 192 dB dynamic range</Internal Data Path and Processing> <A/D, D/A Converters>24 bit, 96.096 kHz sample rate maximum</A/D, D/A Converters> <A/D Dynamic Range>123 dB, A-weighted bandwidth<br>120 dB, 20 Hz–22 kHz bandwidth</A/D Dynamic Range> <D/A Dynamic Range>114 dB, A-weighted bandwidth<br>111 dB, 20 Hz–22 kHz bandwidth</D/A Dynamic Range> <Frequency Res. Mic or Line>10 Hz–20 kHz, +0.1, -0.5 (gain controls centered, measured at 48 kHz)</Frequency Res. Mic or Line> <THD + Noise>Mic: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, -15 dBu input)<br>Line: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, +16 dBu input)</THD + Noise> <Gain (input dBu to -20 dBFS)>Mic: Off (0) to 76.0 dB<br> Line: Off, -26.0 to 50.0 dB</Gain (input dBu to -20 dBFS)> <Input Impedance>Mic (XLR and TA3): 3.3k ohm; Line (XLR and TA3): 3.3k ohm</Input Impedance> <Input Clipping Level> Mic input: +8 dBu minimum (gain = 10 dB); line input: +26 dBu minimum (gain = 0 dB)</Input Clipping Level> <Input Topology Mic and Line> Fully electronically balanced, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold</Input Topology Mic and Line> <Gain Matching Mic/Line Inputs>0.1 dB increments, channel-to-channel while linked</Gain Matching Mic/Line Inputs> <Common Mode Rejection Ratio>Mic: 40 dB minimum at 80 Hz</Common Mode Rejection Ratio> <Metering>112-segment (8 x 14), sunlight-viewable, selectable peak, VU, or peak (with or without peak hold) with VU ballistics, variable brightness</Metering> <High-Pass Filters> 40-320 Hz in 10Hz steps @ 6/12 dB/oct (Setup Menu selectable)</High-Pass Filters> <Mic Powering>48 V phantom through 6.8k resistors, 10 mA per mic available, menu-selected per channel in mic or line level positions</Mic Powering> <Mic/Line Input Limiters>Variable threshold -12 to -2 dBFS; Infinite:1 limiting ratio, 2 mS attack time, menu-selectable release time 200-2000 mS, soft-knee starting approximately 6dB below setting.</Mic/Line Input Limiters> <Line Output Clipping Level>+24 dBu minimum, 10k ohm load</Line Output Clipping Level> <Attenuation & Resolution> 0–20 dB, 1 dB increments</Attenuation & Resolution> <Output Topology Line>Fully electronically-balanced, RF, ESD, short, and overload protected; pin-2 driven hot, pin-3 driven cold; let pin-3 float for unbalanced connections.</Output Topology Line> <I/O – Digital> Balanced AES in 1-8 on DE15 connector 110 ohm, 2 V p-p, AES and S/PDIF compatible with RCA adaptor, AES42 mode 1 compatible and provides 10 V to AES42 microphones<br>AES3 Balanced AES out 1-4 on TA3 connector; Balanced AES out 5-6 on DE15 connector 110 ohm, 2 Vp-p, AES and S/PDIF compatible with RCA adaptor</I/O – Digital> <Digital Storage> Internal hard drive SATA interface 2.5-in hard drive 4200–7200 RPM supported, solid-state drive (SSD) support, FAT32 formatted, up to 2 TB addressable<br>CompactFlash CF type I, II, and + (microdrive) compatible, UDMA (300x) compatible, FAT32 formatted, up to 2 TB addressable</Digital Storage> <File Types>Record: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;<br>Playback: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit;<br>MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo; MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo</File Types> <Utilities>Drive formatting and speed test for internal hard drive, CF and external drive volumes</Utilities> <Data Transfer / Control>FireWire 400: For connection to external drives and computers: IEEE-1394a compliant, 6-pin FireWire, Windows 2000, XP, Vista, 7) Mac OS X only<br> FireWire 800: For connection to external drives and computers: IEEE-1394b compliant, 8-pin FireWire, Windows (2000, XP, Vista, 7), Mac OS X only<br>USB 2.0: Slave mode only. For connection to Windows( 2000, XP, Vista,7) Mac OS X only<br> USB Keyboard Input: For connection to USB keyboards for entering notes and controlling features and functions of the 788T via user selectable keyboard shortcuts.</Data Transfer / Control> <Time Code>Modes Supported: Off, free run, record run, 24 hour run, external time code receive<br> Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+<br> Accuracy: 0.2 ppm, when tuned with Ambient Master Controller, holds TC clock for 4 hours after main battery removal; after 4 hours, retains time of day<br> Input / Output 20k ohm impedance, 0.3V p-p (–8 dBu) minimum / 1k ohm impedance, 3.0V p-p (+12 dBu)</Time Code> <Word Source>Internal Sync: internal word clock generator<br>External Sync Input: Word Clock, AES3, or Video (NTSC, PAL, and Tri-Level)<br>Word Clock Output: Square wave, running at sample rate, 3.3 V p-p, 75 ohm</Word Source> <Power>Power supply (batteries): operating cell, removable 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5–8.5 V, time code battery, internal 3.6 Li–ion<br>Power supply (external): 10–18 V, 1000 mA minimum, via locking 4-pin Hirose connector, use Hirose #HR10-7P-4P (DigiKey# HR100-ND) for locking mating DC connector; pin-1 (-), pin-4 (+).</Power> <Environmental>Operation and Storage ambient temperature 5–55° C, relative humidity (non-condensing) 80%</Environmental> <Other>Tone Oscillator: 100 Hz–10 kHz, variable output, assigned to tracks or outputs (menu-selectable)</Other> <Dimensions and Weight>Size: 45 mm x 257 mm x 163 mm (H x W x D) 1.8" x 10.1" x 6.4"<br> Mass: unpackaged: 1.7 kg, (3 lbs 12 oz.) without battery</Dimensions and Weight>