MRX414 with RX-4 Stand-Alone Receiver Bundle

The MRX414 with RX-4 Stand-Alone Receiver Bundle includes a stand-alone interface with quad channel wideband receiver module with four diversity receivers for up to four channels of audio from four transmitters. It's a great way to get started with Zaxcom wireless in any cart or bag system or to add flexibilty to your current set-up.

RX-4 Stand-Alone Interface

The RX-4 is an interface to  convert Zaxcom’s MRX214 and MRX414 receiver modules into stand-alone receivers.

The RX-4’s intelligent design includes two OLED displays to easily visually monitor data from up to 4 separate transmitters. There are four tricolor LEDS that indicate the decode status of each of the four receive channels and push buttons for simple navigation of menus.

The audio and power connectors are located directly behind the control panel of RX-4 so cables can be conveniently attached without taking apart the sound bag. The audio output interface is via two TA5 connectors, either digital out via two AES3 connections or balanced line level analog out. Power is connected via a 4-pin Hirose.

MRX414 Module

The MRX414 is a Quad channel wideband receiver module with four diversity receivers for up to four channels of audio from four transmitters.  It's compatible with the Zaxcom Nova Recorder or RX-12/12-R Receiver Enclosures.

The UHF diversity receiver consumes the same power as a QRX212 with  twice the channels and has an improved receiving range and 5db better dynamic range. It utilizes the High Q tunable tracking front end filter within its host device to combat interference and extend range. 

The module is compatible with any Zaxcom digital recording wireless transmitter and with all Zaxcom modulations (Mono, Stereo, XR and ZHD).

The modules can be easily added or hot-swapped as necessary.

The MRX414 sets a new Zaxcom standard for RF performance. The ultra-low noise floor (-135 dB) RF design will provide ultra-long range. The RF performance exceeds the previous generation of Zaxcom receivers by 5 dB while enhancing the rejection of interfering signals from things like walkie talkies, cell phones and HD Television transmission by 10 dB.

The MRX414 is an extremely power-efficient digital wireless receiver on the market; the module draws 300 mA @ 13 VDC (150 mA per receiver).