P9T Wireless Transmitter

<RF Output Power>Selectable: 10, 50, 100 mW (regionally dependent)</RF Output Power> <RF Output Impedance>50 Ω (typical)</RF Output Impedance> <Net Weight>850 g</Net Weight> <Dimensions>7.76" x 6.54" x 1.66" (197 x 166 x 42 mm)</Dimensions> <Power Requirement>415 mA typical @ 120VAC (with RF on 100 mW power mode, no audio)</Power Requirement> <></> <Audio Input></Audio Input> <Connector Type>Combination XLR and 6.35 mm (1/4”) TRS</Connector Type> <Polarity>XLR: Non-inverting (pin 2 positive with respect to pin 3) 6.35 mm (1/4”) TRS: Tip positive with respect to ring</Polarity> <Configuration>Electronically balanced</Configuration> <Impedance>70.2 kΩ (actual)</Impedance> <Nominal Input Level>Switchable: +4 dBu, –10 dBV</Nominal Input Level> <Maximum Input Level>+4 dBu: +23.3 dBu; –10 dBV: +12.5 dBu</Maximum Input Level> <Pin Assignments>XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground</Pin Assignments> <Phantom Power Protection>up to 60 V DC</Phantom Power Protection> <></> <Audio Output></Audio Output> <Connector Type>6.35 mm (1/4”) TRS</Connector Type> <Configuration>Electronically balanced</Configuration> <Impedance>Connected directly to inputs</Impedance> <Remote Antenna Powering>Switchable DC T-bias powering, 12VDC @ 250mA max, regulated for active antenna powering, short circuit protected</Remote Antenna Powering> <DC output>Unregulated incoming volts, switched, individually fused and protected against reverse polarity</DC output> <Total Current Withdraw>3A (max)</Total Current Withdraw>