d:dictate MMP-B Preamp

<Output connector> XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase </Output connector> <Low-cut frequency, -3 dB> 50 Hz </Low-cut frequency, -3 dB> <Noise with shorted input A-weighted> 1.1 µV </Noise with shorted input A-weighted> <Output voltage, RMS> > 1.8 V </Output voltage, RMS> <Output voltage, peak> > 2.5 V </Output voltage, peak> <Type of electronic circuit> Active </Type of electronic circuit> <THD@1VRMS, 1kHz> < 0.5 % </THD@1VRMS, 1kHz> <Dynamic range> 124 dB </Dynamic range> <Switchable attenuator, filters etc.> High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz </Switchable attenuator, filters etc.> <Output impedance> < 150 ohm </Output impedance> <Cable drive capability> 100 m (328 ft) </Cable drive capability> <Output balance principle> Signal balanced </Output balance principle> <Common mode rejection ratio (CMRR)> > 40 dB </Common mode rejection ratio (CMRR)> <Power supply (for full performance)> 48 V Phantom power (± 4 V) </Power supply (for full performance)> <Current consumption> 4.5 mA </Current consumption> <Color> Matte black </Color> <Weight> 38 g (1.3 oz) </Weight> <Diameter> 19 mm (0.75 in) </Diameter> <Length> 99 mm (3.9 in) </Length> <Temperature range> -40 °C to 45 °C (-40 °F to 113 °F) </Temperature range> <Relative humidity (RH)> Up to 90% </Relative humidity (RH)>