KK 13 Omnidirectional Capsule

<Acoustical operating principle>Pressure transducer</Acoustical operating principle> <Directional pattern>Omni</Directional pattern> <Frequency response>20 Hz … 20 kHz</Frequency response> <Sensitivity>3.3 mV/Pa ≅ -49.6 dBV</Sensitivity> <Rated impedance>10 ohms</Rated impedance> <Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾>62 dB</Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾> <Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾>74 dB</Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾> <Equivalent noise level, CCIR¹⁾>32 dB</Equivalent noise level, CCIR¹⁾> <Equivalent noise level, A-weighted¹⁾>20 dB-A</Equivalent noise level, A-weighted¹⁾> <Maximum SPL for THD 0.5%²⁾>153 dB SPL (with Usupply = 10V, Rfeed = 20 kohms)</Maximum SPL for THD 0.5%²⁾> <Dynamic range of the amplifier, A-weighted³⁾ for THD < 0.5 %>133 dB</Dynamic range of the amplifier, A-weighted³⁾ for THD < 0.5 %> <Max. output voltage>12 dBu</Max. output voltage> <Power supply>max. 10 V, with Rfeed = 20 kohms</Power supply> <Current consumption>0.22 mA</Current consumption> <Weight>2.8 g</Weight> <Diameter>12 mm</Diameter> <Length>13.5 mm</Length> <Operating temperature range>0 °C - +40 °C</Operating temperature range> <Operating Humidity range>0 %…90 % rel. hum</Operating Humidity range> <Storage temperature range>−20 °C - +70 °C</Storage temperature range> <Storage Humidity range>0 %…95 % rel. hum.</Storage Humidity range> <>1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS</> <>2) measured as equivalent el. input signal</> <>3) THD of microphone amplifier at an input voltage equivalent to the capsule output at the specified SPL</>