KSM42 Side Address Cardioid Microphone

<Transducer Type>Dual-Diaphragm, Front-Active, Externally Biased Condenser</Transducer Type> <Frequency Response>60 to 20,000 Hz</Frequency Response> <Polar Pattern>Cardioid</Polar Pattern> <Output Impedance>147 ohms</Output Impedance> <Sensitivity, at 1 kHz, open circuit voltage>-37 dBV/Pa (14.1 mV), 1 Pascal=94 dB SPL</Sensitivity, at 1 kHz, open circuit voltage> <Self Noise (typical, equivalent SPL, A-weighted)>8.5 dB</Self Noise (typical, equivalent SPL, A-weighted)> <Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)>86 dB; S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted</Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)> <></> <Maximum SPL (1 kHz at 1% THD)>1000 ohms load = 139 dB</Maximum SPL (1 kHz at 1% THD)> <>2500 ohms load = 139 dB</> <></> <Dynamic Range (at 1 kHz)>1000 ohms load = 131 dB</Dynamic Range (at 1 kHz)> <>2500 ohms load = 131 dB</> <></> <Clipping Level (20Hz-20 kHz at 1% THD)>1000 ohms load = 6.5 dBV</Clipping Level (20Hz-20 kHz at 1% THD)> <>2500 ohms load = 8 dBV</> <></> <Common Mode Rejection (10 Hz to 100 kHz)>Greater than 60 dB</Common Mode Rejection (10 Hz to 100 kHz)> <Polarity>Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3</Polarity> <Connector>Three-pin professional audio (XLR), male</Connector> <Power Requirements>11 to 52 Vdc phantom, 6 mA</Power Requirements> <Length x Max Diameter (without pop filter)>7.3in (185.4mm) x 2.2in (55.9mm)</Length x Max Diameter (without pop filter)> <Weight>1.09 lbs (494 g)</Weight> <Weight with shock mount and pop filter>1.81 lbs (820 g)</Weight with shock mount and pop filter>