QT-5100 Incognito Transmitter, Lectro Compatible

470 – 540 MHz

Model:

QT-5100 Incognito

Price:	$2,745.00

Features

Controllable by RCAS
Detachable battery
Configured as two tiny components
Easily concealable in wigs and bras
5 hour run time at 50mW

Description

Overview

The QT-5100 Incognito by Q5X is a small. light, and comfortable transmitter designed for one of the most demanding environments for sound: the theater. This version adds RCAS remote control function to the unit, allowing a technician to remotely change parameters and control settings without needing to access the transmitter. RCAS allows control and monitor of: on/off, monitor status and battery level, frequency, mic gain, RF power level, and grouping.

Housed in a 2-part splash-proof case, the QT-5100 Incognito is safe against shock, impact, and water damage. Its removable, rechargable battery can get up to 8 hours of charge at 100 mW, so it can last all performance without needing a battery swap.

The QT-5100 Incognito offers approximately 3,000 individual channels between 470 and 540 MHz (tunable in 25 kHz steps), to find just the right frequency in a crowded spectrum. The small size and weight of the QT-5100 Incognito make it a favorite among actors. It's small enough to be hidden almost anywhere, and it's light enough that your talent will barely notice it's there.

This model is compatible with Q5X’s receivers, as well as Lectrosonics UCR and SRC receivers operating within Block 470 and Block 21.

Specifications

<RF Output Power> 10 to 250 mW (user selectable region specific) </RF Output Power> <Number of Channels> 3000 </Number of Channels> <RF Frequency Range> 470 to 540 MHz </RF Frequency Range> <Switching Bandwidth> 75 MHz (25 kHz steps) </Switching Bandwidth> <Modulation> FM </Modulation> <Nominal Deviation> ± 40 kHz </Nominal Deviation> <Peak Deviation> ± 54 kHz </Peak Deviation> <Pre-Emphasis> 50 µ </Pre-Emphasis> <Compander> Q5X DCS-QT </Compander> <Signal to Noise Ratio> 110 dB (A) rms </Signal to Noise Ratio> <Frequency Stability> ± 0.001% </Frequency Stability> <Spurious Emission> < -60 dBc </Spurious Emission> <Total Harmonic Distortion (THD)> 0.3% at nominal deviation </Total Harmonic Distortion (THD)> <Frequency Response> 50 Hz to 17,000 Hz (NOTE: System frequency response is dependent on the microphone element) </Frequency Response> <Audio Connector> 1-pin Lemo </Audio Connector> <Antenna> ¼ wave Antenna </Antenna> <Battery> Internal Lithium </Battery> <Operating Time (Battery)> Estimated 8 hrs @ 50mW </Operating Time (Battery)> <Operating Temperatures> -10°C to 45°C </Operating Temperatures> <Approvals> FCC, CE, Industry Canada </Approvals> <Dimensions> 59mm x 43mm x 10mm, 65mm x 40mm x 10mm </Dimensions> <Weight> 68 g, including battery </Weight>

In the Box

Review

Add new comment

Consumer Alert

Starting in 2017, the 617-652 MHz and 663-698 MHz frequencies are being transitioned by the Federal Communications Commission (FCC). Users of wireless microphone devices that operate in any portion of those frequencies must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC’s wireless microphone website at www.fcc.gov/wireless-microphones-guide or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

Buy/Rent

Buy

Product:

Add to Wishlist

Rent

Price:

$0.00/billing day

Please note that rental items will be provided from available frequency and color options. If you have a preference or requirement, please indicate it in order comments.

# of billing days subject to duration.
Week = 3 billing days/week
3 Weeks or more = 2 billing days/week