Rainman CB Mic Mount Adapter

The Rainman CB Mic Mount Adapter consists of a microphone Charlie bar extension )which also comes with a rubber washer for isolation) and a flange to connect your wireless transmitter at the top of the boom pole.

It is available with either a 1" or 2" bar. Some setups will need a greater clearance to ensure the shock mount, jumper cable, and wireless transmitter have ample clearance

The Rainman CB works with virtually any shock mount that you have in your arsenal. Start by connecting the CB1 to the threads at the top of your boom pole, followed by your shock mount. Once fastened, attach your microphone to the shock mount and connect a jumper cable to the microphone as well as the flange. You can use the included Allen wrench to tighten the flange around the connector.

Once the jumper cable is connected to the flange tightly, connect your wireless transmitter to the connector. You may need to swivel the XLR connector inside of the flange, so have the allen wrench handy for one final adjustment. The goal is to have your transmitter’s front panel completely accessible and not facing the boom pole where you will have to remove it to make adjustments.