RX200

<Receiver> </Receiver> <Receiver RF Channels> 1 </Receiver RF Channels> <Diversity method> Antenna switching </Diversity method> <RF Modulation> Proprietary digital method </RF Modulation> <RF Frequency Range> 518 to 698 MHz </RF Frequency Range> <RF Frequency Step> 100 KHz </RF Frequency Step> <RF Signal Bandwidth> 200 KHz </RF Signal Bandwidth> <Channel Separation> 500 KHz (700 KHz recommended) </Channel Separation> <Sensitivity> -114 dBm </Sensitivity> <Antenna Connector> 50-ohm SMA female </Antenna Connector> <Receiver Audio – Analog Output (x 2)> </Receiver Audio – Analog Output (x 2)> <Dynamic Range> 116 dB </Dynamic Range> <Distortion> 0.00% </Distortion> <Frequency Range> 20Hz to 16kHz </Frequency Range> <DAC Bit-depth> 24 bits </DAC Bit-depth> <DAC Rate> 32 or 96 kHz (switchable) </DAC Rate> <Connector> TA-5M </Connector> <Audio Output> Active analog balanced </Audio Output> <Audio Output Level> -35dBm (mic), -10dBm (consumer) or 0dBm (line) </Audio Output Level> <Receiver Audio – Digital Output> </Receiver Audio – Digital Output> <Signal Format> AES Balanced </Signal Format> <AES dynamic range> 123dB </AES dynamic range> <Frequency Range> 20Hz to 16kHz </Frequency Range> <AES output> AES3 balanced at 32 or 96KHz </AES output> <Audio Output Connector> TA-5M </Audio Output Connector> <Time Code> </Time Code> <Time code output connector> BNC </Time code output connector> <Time code output level> .01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP </Time code output level> <Time code output rate> 23.98, 24, 25, 29.97 ND, 29.97 DF, 30 </Time code output rate>