Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Multi-slot housing provides RF and power distro for three slot-compatible wireless receivers such as Lectrosonics SR series, Wisycom MCR42S, and Sennheiser EK 6042. Available as Single Band or Dual Band models.
Diversity 1 x 3 active RF splitter with bandpass filtering and low noise, high current amplifiers.
Combines power and RF distribution in one compact unit with dual power inputs and a diversity 1x4 active RF splitter.
Robust and compact RF Multi SMA device with two 1 x 8 active splitters.
Ultra low-loss 50 Ohm coax cable with BNC male to BNC male connector.
Discreet clip for the Q5X PlayerMic and Chameleon flexible transmitters.
Remote control for Q5X RCAS transmitters, such as the QT-5100.
Compact 2.9" x 1.7" x 0.4" remote controllable tx in a flexible water-resistant case with internal rechargeable battery and 1-pin Lemo connector. Compatible with Q5x and Lectrosonics UCR and SRC receivers.
Receives and transmits VHF band signals from 170-220 MHz.
High-quality acoustic foam windshield designed for microphones 19-22 mm in diameter from Deity, DPA, Schoeps, Sennheiser, and more.
Designed to be used indoors with short shotgun and small condenser pencil microphones up to 5.9" in length.
Designed to be used outdoors with standard shotgun and condenser pencil microphones up to 9.8" in length.
Long-haired synthetic acoustic fur covers compatible with Rycote, Cinela, and Rode blimps and zeppelins.
Slide-on fur windscreen designed for shotgun microphones 19-22 mm in diameter from DPA, Schoeps, Sennheiser, and more.
High-quality acoustic foam windshield designed for shotgun microphones 24-25 mm in diameter Sennheiser, Sony, and more.
Accepts two RF inputs and outputs four RF outputs.
Allows the connection of up to eight UV-1G wireless intercoms or other UHF transmitter to one antenna.
Foam and fur set of wind protection for Countryman B3, Sanken COS-11, DPA 4060/DPA 6060 and other similarly-sized small lavaliers.
Converts UHF folding dipole antenna to use with 216 mHz transmitters.
Uncut whip antenna for Lectrosonics 200/400/190B/195B transmitters and Zaxcom ENG receivers.
Compact box with a power input, five switchable outputs, a selectable non-switched output, and a USB output for use in a battery distribution system (BDS).
Standard BDS power output cable w/ right angle plug (center pin positive). For use with Lectrosonics IFBT1, 100, 200, 400 series & BattElim, PSC DV Promix 3, Shure FP-32A & FP-33 mixer, and others.
For use with Lectrosonics 185, 187, 190, 195, 201, 211, 411 receivers.
For Lectrosonics SR receiver and battery eliminator for Lectrosonics SMA transmitter. 24".
For Sound Devices 552, 788T, 744T, 722, 302, MixPre (V2), 442, MM1 (V2), Lectrosonics Quadpack, Wendt X5, PSC Promix 6, AlphaMix, M4mkII, Sen. 3041U, Sony WRR855, SQN-4S. 24"
Adapts a Hi-Q Smart Battery for power and battery telemetry with a Sound Devices 8-series recorder and a compatible BDS.
Adapts a HI-Q Smart Battery for use with a TA4F power input.
Adapts a NP-1 Battery for use with a TA4F power input. 18".
Adapts two NP-1 Battery for use with a TA4F power input. 18".
Compact box with battery telemetry capabilities, two power inputs, eight switchable outputs, and a USB port or use in a battery distribution system (BDS).
6' adapter cable for US civilian fixed wing aircraft.
6' adapter cable for civilian helicopters and military aircraft. 20dB pad.
20' ENG breakaway assembly with time code for Sound Devices 633.
48" four-pin XLRM to XLRF DC power cable.
14" audio input cable for the Alexa Mini Camera.
With flexible ear hook and 3.5 mm right-angle mono connector. Hinged for use with right or left ear.
Small, lightweight smart battery with the Inspired Energy contact configuration.
For use with Remote Audio Hi-Q smart batteries.
Adapts a Hi-Q Smart Battery for power and battery telemetry with a Sound Devices 8-series recorder.
Adapts a HI-Q Smart Battery for use with a 4-pin Hirose power input.
Provides up to 45dB of extreme isolation.
Over-ear headphones provide up to 45dB of extreme isolation and the inline cable mic uses 12-48V phantom power or 5v bias.
1 in, 5 out on XLR4s, circuit protected power distribution box, 6A max for each output, 24A max total.
Flexible wire tool for quickly threading lav cables through clothing.
1/8" (3.5mm) threaded adapter allows the Lav Snake to be used with mics wired for Sennheiser Evolution and Sony transmitters.
Lemo threaded adapter allows the Lav Snake to be used with mics wired for Zaxcom, Sennheiser and Wisycom transmitters.
Large diaphragm foldable headphone with built-in miniature gooseneck mic which uses 12-48V phantom power or 5v bias.