Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
Adapts a HI-Q Smart Battery for use with whatever you wire to the pigtailed leads.
18" long dual XLR 3-pin female right-angle, with 3D printed caps, to TA6 female stereo Y-cable for Lectrosonics DCHT
18" long dual TA3 female right-angle, with 3D printed caps, to TA6 female stereo Y-cable for Lectrosonics DCHT
Lightweight windshield with interchangeable mounts for XY/MS stereo or mono setups and XLR7 output cable. Designed for mics under 8.3" and available with long or short pile fur cover.
Complete, customizable Nomad sound cart with 7RU and 10 RU rack spaces.
18" long XLR 3-pin female right-angle to XLR 3-pin male cable
Stingray MixPro Audio Bag and Waist Belt in one convenient bundle for field recording with a MixPre-3/6 or similarly-sized recorder.
Lightweight boom pole extension with mounting plates for standard wireless transmitters.
Set of ten wraps to ensure a comfortable, secure fit for earpieces.
XLR4 cable for connecting PSC Bell & Light Station to the power supply or another station.
Includes power supply and wired controller for the PSC Bell and Light System.
26" MD-6u BDS to right-angle locking 2.1 long cable for use with Zaxcom Stereoline, RX900, QRX100/200, MicPlexer, Sound Devices MixPre (v1), and 442 (v1).
26" MD-6u BDS to right-angle locking 2.5mm short right angle locking cable for use with Zaxcom IFB100/200, STA100/150/042, CL900.
Plastic sleeve with steel belt clip for the Zaxcom ZMT/ZFR 400.
Condenser microphone with switchable polar patterns designed for vocals.
Lightweight aluminum framework for three Lectrosonics SR or Wisycom receivers. Fits on a Sound Devices 633.
Lightweight aluminum framework for four Lectrosonics SR or Wisycom receivers. Fits on a Sound Devices 788T.
Set of two large rubber holders for boom poles up to 2" in diameter. Mounting hardware not included.
Omnidirectional compact electret condenser lavalier tuned for voice with Sony 4-pin SMC9-4P connector.
53wh 13.2v, 4.0Ah NiMH Battery. Not to be confused with the 3.6V Fuji NP-50 battery for transmitters.
Threaded collar for the end of for any modern (post-1997) 6-section VdB boom pole.
Threaded heel screwplate with embedded XLRM connector for the bottom of for any modern (post-1997) 6-section VdB boom pole.
Rounded rubber foam bumper suitable for any older (pre-1997) 5-section VdB boom pole.
Designed for use over the Windtech SG-60 and SG-81 windscreens.
Fits the Sennheisr MKH 816 and similarly-sized long shotguns.
Fits the Rode NTG1/2, Sennheiser MKH-60, and most similarly-sized mics.
Fits the Neumann KMR-81i/D, Sanken CS-1, and most similarly-sized mics.
Jointed 2.4 GHz antenna for Zaxcom Nomad Recorder.
Uncut whip antenna for TRXLT, TRXLA, and ZMT3 series transmitters.
Boom pole mount for XLR cable or plug-on transmitter.
15" right-angle XLRF to XLRM thin cable with boom pole mount for XLR cable or plug-on transmitter.
Omnidirectional dynamic microphone with 9.5" handle for keeping interviewer's hand out of the shot.
Omnidirectional dynamic microphone with high-output neodymium capsule magnet.
Rack-mounted 15 amp power bar with eight rear panel outlets, one front panel outlet, dual retractable LED lights, and surge and spike protection.
Smooth, flat, wide-range frequency response appropriate for music and speech
Side-address microphone designed to provide smooth, natural sonic characteristics.
Set of three small pouches with transparent backs for lavaliers and other small items.
Multicoupler for up to four separate pairs of diversity antenna connections. 470-960 MHz
Dante/ AES67 network audio interface in a robust stage box.
Pelican case with custom cut foam for the CantarMini.
Lightweight field case for Sound Devices MixPre-6 Recorder.
Brings together up to four in-ear monitor transmitter signals into a single rear panel mounted antenna connector.
Aadds 10dB of gain allowing for longer cables runs with passive antennas.
Standard sensitivity (+0dB) lav with 3.5mm locking adapter for Sennheiser G2, G3, EW series, and SK 1093.
Lighweight padded bag designed for the Sound Devices MixPre-3.
Standard sensitivity (+0dB) lav with XLR connector.
Low sensitivity (-10dB) lav with Lemo 3 pin connector for Zaxcom transmitters.
Low sensitivity (-10dB) lav with XLR connector.