Please check the item status before ordering or contact us if you need something urgently.
Close Announcement
Empty
16 channel AES/EBU input/output interface card for the DA-6400 recorder.
16-channel analog output interface card for use with the DA-6400 recorder.
64-channel Dante interface card for the DA-6400 recorder.
64-channel MADI BNC interface card for the DA-6400 recorder.
64-channel MADI BNC interface card with pass-through for the DA-6400 recorder.
Remote control for Tascam SS-R250N.
12-track mixer/recorder console with playback and remix capabilities.
Coiled XLR cable set with side exit for QXS5130 / QX5130 boom poles. Available in mono or stereo.
Coiled XLR cable set with bottom exit for QXS5130 / QX5130 boom poles. Available in mono or stereo.
23.6" 5-pin Lemo to 5-pin Lemo cable.
9.8" 5-pin Lemo to right-angle 3.5 mm (1/8") TRS coiled cable.
23.6" 5-pin Lemo to right angled 5-pin Lemo cable.
Connects the ARRI Alexa for time code and ethernet connectivity.
2-pin Lemo cable to power a :pulse or :wave from an external Lemo2 port.
5V USB power adapter with five plug configurations.
Micro USB to USB-A cable.
4-pin Hirose to 90° 2.5mm PP90 cable to power the Minitrx+ or other device with a 4-pin Hirose power input from the Sound Devices SL-6.
Sync cable for use with DSLR cameras.
Protective pouch with a belt clip for the :minitrx+ time code generator.
Protective pouch for the :wave and :pulse time code generators.
Feeds mic level time code from the LTC port on the UltraSync One to any device that uses a 3-pin XLR input.
Feeds time code to the UltraSync One from any device that outputs time code from a 3-pin XLR port.
Converts the DIN 1.0/2.3 port on the UltraSync ONE into a BNC port.
Mounts antennae, LCD screens, LED lights and other accessories onto bags and carts.
Comfortable,minimal harness for mixer bags.
Dual charger for NP-50 batteries such as those used in Lectrosonics SSM and Zaxcom ZMT transmitters
Dynamic microphone designed for vocal performance.
Super-lightweight backpack/run bag that collapses into an attached pouch.
Clear LCD screen protectors for the 633, 664, and 688.
Power adapter with smart battery cup to TA4F connector with 24″ straight cable.
Hinged belt clip for dual battery SMDWB transmitters. Antenna and mic can face upwards or downwards.
Machined, stainless steel wire belt clip for dual battery SMDWB transmitters. Antenna and mic can face upwards or downwards.
Wideband transmitter with recorder capability, removable antenna, selectable 25, 50 and 100 mW RF power, line input level select, and RM remote control capability. Powered by a AA battery.
Hinged belt clip for single battery SMWB transmitters. Two orientations available.
Machined, stainless steel wire belt clip for single battery SMWB transmitters. Two orientations available.
Wideband transmitter with recorder capability, removable antenna, selectable 25, 50 and 100 mW RF power, line input level select, and RM remote control capability. Powered by 2 AA batteries.
Additional water protection for the Rainman Raincover.
High sensitivity lav with Microdot connector (adaptor required). Increased dynamic range and sound quality over original DPA 4060s.
Low sensitivity lav for tx with lower supply voltage with Microdot connector (adaptor required). Increased dynamic range and sound quality over original DPA 4060s.
Dual ear cardioid headset mic with 120mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Single ear cardioid headset mic with 120mm boom arm and Microdot connector (adaptor required). Mic adjustable left or right.
Dual ear cardioid headset mic with 120mm boom arm and TA4F connector for Shure wireless. Mic adjustable left or right.
Dual ear cardioid headset mic with 120mm boom arm and 3.5mm locking connector for Sennheiser wireless. Mic adjustable left or right.
Set of two compact and user-friendly time code generator with Bluetooth control.
Designed for use with shotgun mic pairs in parallel, including the Schoeps MiniCMIT, Sennheiser MKH 8060 and 416, Sanken CS-1, and DPA 4017C.
Designed for use with shotgun mic pairs in a XY configuration, including the Sennheiser MKH 8040 and Schoeps CCM 4L.
Designed for use with single stereo mics, including the Sanken CS-5/50 and Sennheiser MKH 418.