d:dictate Gooseneck Adaptor

<Output connector> XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase </Output connector> <Low-cut frequency, -3 dB> 15 Hz </Low-cut frequency, -3 dB> <Noise with shorted input A-weighted> 0.6 µV </Noise with shorted input A-weighted> <Output voltage, RMS> 2.2V </Output voltage, RMS> <Output voltage, peak> 3.1V </Output voltage, peak> <Type of electronic circuit> Active </Type of electronic circuit> <THD@1VRMS, 1kHz> < 0.2 % </THD@1VRMS, 1kHz> <Dynamic range> 131 dB </Dynamic range> <Output impedance> 100 Ω </Output impedance> <Minimum load impedance> 2 kΩ </Minimum load impedance> <Cable drive capability> 100 m (328 ft) </Cable drive capability> <Output balance principle> Impedance balancing </Output balance principle> <Common mode rejection ratio (CMRR)> > 40 dB </Common mode rejection ratio (CMRR)> <Power supply (for full performance)> 48 V Phantom power (± 4 V) </Power supply (for full performance)> <Current consumption> 3.5 mA </Current consumption> <Color> Matte Black </Color> <Diameter> 19 mm (0.75 in) </Diameter> <Temperature range> -40 °C to 45 °C (-40 °F to 113 °F) </Temperature range> <Relative humidity (RH)> Up to 90% </Relative humidity (RH)>